Basic Info.
Function
Post Amplifier, Amplifier Combined
Transport Package
Card Board Carton
Product Description
DA-602 is compact, and has a simple interface with just two dials which are turned to adjust and pushed to switch. It has a selection of 4 inputs and a microphone input, making it suitable for meeting rooms, small auditoriums, lecture theatres, school halls, and small churches.
Microphone Input
It uses a professional XLR connector and the input is "balanced" to eliminate electro-magnetic noise induced on long cables. The microphone input has "Phantom Power" a voltage which is required by condenser-type microphones such as lectern microphones.
RS-232
It can be controlled by a control device via IR or RS-232. It also comes with an IR remote control gives the user bass and treble adjustment and direct input selection.
D-Class
An efficient Digital-class amplifier chip dramatically reduces power consumption especially at rest.
4 x Stereo Inputs
Four stereo inputs accept input from a variety of sources such as computers (via the headphone jack), tablets or phones. 3 of the inputs are via 2-phono (RCA) connectors on the rear panel. Input 4 is via a 3.5mm Minijack connector, and is duplicated on the front and rear panels for easy access.
Line Output
A line-level pre-output on the rear panel bypasses the internal amplifier. It would connect to a larger amplifier or powered loudspeakers. It is post-mix, which means any volume adjustment made on the front panel affects the output level.
Auto-Standby
If the amplifier senses no input it will automatically go into standby mode. When it senses input it will reactivate. Auto-standby can be disabled.
SPECIFICATION:Power :.........................................2 x 30w @ 8 ohms
Total Harmonic Distortion :....................................<1%
Frequency response (line in):........................... 20Hz~20kHz
Signal to noise ratio (line in): ..................................75dB
Rating input level/Impedance:.............. line in 800~900mV/47kohms
Operating temperature range: ...............0 to +40°C (32 to +104 °F)
Power consumption (rating condition): .........................≤90W
Phantom Power Disable: ..........................via internal jumper
Phantom Power: .............................................24V
Dimensions .....................................253 x 253 x 45 mm
Carton size: .....................................415 x 230 x 80 mm
N.W./G.W. : ..........................................2.0kg/2.4kg
Power Supply: .......................100~240V Internal Power Supply
Address:
No . 62 G107 , Sanhua Village , Xinhua, Huadu, Guangzhou, China
Business Type:
Manufacturer/Factory
Business Range:
Consumer Electronics, Electrical & Electronics
Management System Certification:
ISO 9001
Company Introduction:
Established by a team of Electronics and Acoustic Engineers, Acin is producing over valued Acoustic products including HiFi speaker and 5.1 home theater, AV Receiver, HiFi amplifier, Passive speakers, Karaoke speaker and PA speaker...To provide package service, also provides some Audio accessories like banana plug, speaker cable and speakon plug.
Our intention is to offer the Domestic and Overseas customers the best value for money products available drawing on manufacturers from all over the globe. We believe we do it better than most because we never rest in our constant pursuit of excellence.
Unlike many of today′s loudspeaker makers who simply tinker or copy with the cosmetics of someone′s mass market product and make it cheaper, Acin spent a lot on smart design on how to improve the performance of a products without costs increase. Also, we know the importance of "detail", since with every "detail" refined, then an economic product can be extraordinary!
For more information, please visit shenwanmian.en.made-in-china.com
Welcome domestic customers and overseas customers to grow with us!